높은 에너지 밀도
고전류 출력
고속 충전
긴 사이클 생활
기술 사양
전문적인 통합을 위한 포괄적인 데이터. 자세한 열 및 방전 곡선을 보려면 전체 PDF를 다운로드하십시오.
| 모델 번호 | 용량 | 전압 | 크기 (mm) | 인증 | 동작 |
|---|---|---|---|---|---|
| KC 승인 맞춤형 고온 902030HT 3.7V 480mAh 500mAh Lipo 배터리(PCB 포함) JST 몰렉스 | - | - | - | MSDS, UN38.3 | 세부 사항 |
| 11*30*48mm 리튬 폴리머 배터리 DTP 113048HT 3.7V 1700mAh 1500mAh | - | - | - | MSDS, UN38.3 | 세부 사항 |
| 손난로, 타이어 압력 모니터, 웨어러블 장치용 리튬 배터리 고온 DTP403040 3.7V 450mAh | - | - | - | MSDS, UN38.3 | 세부 사항 |
| 고온 리튬 폴리머 배터리 팩 DTP602030-3S1P 11.1V 300mAh | - | - | - | MSDS, UN38.3 | 세부 사항 |
| 2C 방전 26650 3.7V 충전식 배터리 5000mAh, >1000 사이클 | - | - | - | MSDS, UN38.3 | 세부 사항 |
1 / 4
맞춤형 솔루션 단계
01
디자인
기술 팀이 귀하의 특정 부하 요구 사항에 따라 맞춤형 엔지니어링 설계를 작성합니다.
02
샘플링
48-72시간 내 내부 평가를 위한 신속한 프로토타이핑 및 샘플 배송.
03
계약
기술 사양, 생산 일정의 공식화 및 표준 30% 프로젝트 시작 자금.
04
배송
출하 전 최종 QC 점검 및 포괄적인 문서 지원을 통한 안전한 글로벌 물류.
자주 묻는 질문
Can you make ultra-thin batteries? What is the minimum thickness?
Yes. LFP pouch cells can be made at approximately 3 × 45 × 64mm (about 3mm thick). Lithium-polymer cells can be customized for ultra-thin or irregular applications such as smart badges, adult products, and wearables. Ultra-thin designs trade off capacity and peak power, so the balance must be evaluated.
Do you offer high-voltage battery models?
Yes. High-voltage 3.8V lithium-polymer models include DTP852750 (1600mAh), DTP413033 (550mAh), and DTP403048 (700mAh). They offer roughly 15% higher energy density than 3.7V cells, but require precisely calibrated BMS cutoff voltages.
Do you support high-rate or high-current discharge?
Yes. Examples include the DTP751355 (3.7V 500mAh, 8C high-rate) and high-discharge DTP403048/DTP413033 models for electric screwdrivers, massagers, beauty devices, and similar products.
Can batteries operate at high or low temperatures?
We support applications in demanding temperature environments. Please specify the operating temperature range so our engineering team can select the appropriate chemistry and protection strategy, such as low-temperature electrolyte and temperature cutoffs.
Can you make irregular or curved batteries?
Yes. C-shaped, U-shaped, hexagonal, and other irregular pouch designs can be customized. Laser welding or FPC connections are used rather than hand soldering to maintain consistency and safety.
What information is needed for a special battery?
Please provide dimensions, voltage, capacity, discharge rate, connector, protection circuit, operating-temperature range, and application. More complete information enables a faster sample design.
How are certifications handled?
MSDS and UN38.3 are available according to the chemistry. We can support CE, CB, KC, and similar certifications; UL support depends on the application.
What is your sample policy?
There is no MOQ for samples, and samples are normally available in 48–72 hours for evaluation. For ultra-thin or irregular products, we recommend confirming the structure and safety boundaries before the first sample.
What are typical applications?
Typical applications include smart badges, adult products, electric massagers, wearables, medical devices, model aircraft, electronic badges, pet products, iPad batteries, and other digital products.
How do you address swelling and safety protection?
We recommend a storage voltage of 3.80–3.85V per cell. BMS temperature cutoffs and incoming-material controls help reduce swelling risk, while irregular pouch cells must be protected from mechanical compression.