高エネルギー密度
大電流出力
急速充電
ロングサイクル 人生
技術仕様
専門的な統合のための包括的なデータ。詳細な熱および放電曲線については、PDFをダウンロードしてください。
| モデル番号 | 容量 | 電圧 | 寸法 (mm) | 認証 | アクション |
|---|---|---|---|---|---|
| >KC 承認カスタム高温 902030HT PCB JST Molex が付いている 3.7V 480mAh 500mAh Lipo バッテリー | 500mAh | - | - | MSDS, UN38.3 | 詳細 |
| 11*30*48 ミリメートルリチウムポリマーバッテリー DTP 113048HT 3.7V 1700mAh 1500mAh | 1700mAh/1500mAh | - | - | MSDS, UN38.3 | 詳細 |
| リチウム電池高温 DTP403040 3.7V 450mAh ハンドウォーマー、タイヤ空気圧モニター、ウェアラブル デバイス用 | 450mAh | - | - | MSDS, UN38.3 | 詳細 |
| >高温リチウムポリマー バッテリー パック DTP602030-3S1P 11.1V 300mAh | 300mAh | - | - | MSDS, UN38.3 | 詳細 |
| 2C 放電 26650 3.7V 充電式バッテリー 5000mAh、1000 サイクル以上 | 5000 mAh | - | - | MSDS, UN38.3 | 詳細 |
1 / 4
カスタムソリューションへのステップ
01
設計
技術チームが特定の要件に基づいてカスタマイズされたエンジニアリング設計を作成します。
02
サンプリング
迅速なプロトタイピングとサンプル提供（48〜72時間以内）。
03
契約
技術仕様の正式化、生産スケジュール、標準的な30％のプロジェクト開始資金。
04
配送
出荷前の最終QCチェックと包括的な文書サポートを備えた安全なグローバル物流。
よくある質問
Can you make ultra-thin batteries? What is the minimum thickness?
Yes. LFP pouch cells can be made at approximately 3 × 45 × 64mm (about 3mm thick). Lithium-polymer cells can be customized for ultra-thin or irregular applications such as smart badges, adult products, and wearables. Ultra-thin designs trade off capacity and peak power, so the balance must be evaluated.
Do you offer high-voltage battery models?
Yes. High-voltage 3.8V lithium-polymer models include DTP852750 (1600mAh), DTP413033 (550mAh), and DTP403048 (700mAh). They offer roughly 15% higher energy density than 3.7V cells, but require precisely calibrated BMS cutoff voltages.
Do you support high-rate or high-current discharge?
Yes. Examples include the DTP751355 (3.7V 500mAh, 8C high-rate) and high-discharge DTP403048/DTP413033 models for electric screwdrivers, massagers, beauty devices, and similar products.
Can batteries operate at high or low temperatures?
We support applications in demanding temperature environments. Please specify the operating temperature range so our engineering team can select the appropriate chemistry and protection strategy, such as low-temperature electrolyte and temperature cutoffs.
Can you make irregular or curved batteries?
Yes. C-shaped, U-shaped, hexagonal, and other irregular pouch designs can be customized. Laser welding or FPC connections are used rather than hand soldering to maintain consistency and safety.
What information is needed for a special battery?
Please provide dimensions, voltage, capacity, discharge rate, connector, protection circuit, operating-temperature range, and application. More complete information enables a faster sample design.
How are certifications handled?
MSDS and UN38.3 are available according to the chemistry. We can support CE, CB, KC, and similar certifications; UL support depends on the application.
What is your sample policy?
There is no MOQ for samples, and samples are normally available in 48–72 hours for evaluation. For ultra-thin or irregular products, we recommend confirming the structure and safety boundaries before the first sample.
What are typical applications?
Typical applications include smart badges, adult products, electric massagers, wearables, medical devices, model aircraft, electronic badges, pet products, iPad batteries, and other digital products.
How do you address swelling and safety protection?
We recommend a storage voltage of 3.80–3.85V per cell. BMS temperature cutoffs and incoming-material controls help reduce swelling risk, while irregular pouch cells must be protected from mechanical compression.